Télécharger Imprimer la page

gdw 1754 Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

Honda Accord Sport Tourer + Sedan
2008 - ....
Ref. 1754
GENERAL INSTRUCTIONS:
Fitting :
-
Make sure that the tow bar has not been damage during transport and it is the right reference for the
vehicle.
-
Read the fitting instruction before starting and follow them very precisely during the fitting.
-
Present the tow bar under the car first to check if all points are right.
-
If holes have to be drilled, check that no wires can be damaged, remove all soundproofing material,
clean and protect the drilled holes with an anticorrosive product.
-
If the vehicle is equipped with special bumpers (sport or tuning parts...) first contact the technical
service of GDW to be sure that the tow bar can be fitted.
The towbar delivered is only for storage, the parts have to be disassembled!!
Guarantee :
-
The indicated towing weight, "D" and "S" values may not be exceeded
-
The tow bar has to be checked after 1.000 km and every year :
o All bolts should be checked and retightened if necessary
o Repair any damage to the paint finish
o Replace any damaged components
o Parts of the detachable tow bars must be kept well greased.
Use :
-
If the towing ball covers the number plate or the fog light, it must always be removed when no
trailer is used.
WICHTIGE RATSCHLÄGE :
Montage :
-
Vor Anfang von Montage muss Anhängerkupplung auf Transportschade kontroliert werden.
-
Aufmerksam Anbauanleitung zu Rate siehen. Alle Anweisungen sollen gefolgt werden.
-
Erst Anhängerkupplung auf Fahrzeug präsentieren, danach montieren.
-
Vor dem Bohren von Löcher, nachprüfen ob anwesende Kabels nicht beschädigt werden können.
Dröhnenschutz und Unterbodenschutz entfernen. Gebohrde Löcher und Karrosserieunterteilen mit
eine Korrosionfeste Farbe behändeln.
-
Falls Fahrzeug keine Standardstoßstangen hat (spezielle Serie, Sportausführungen, Tuning ...), muß
Aussparung nachprüfen. Im Zweifelsfall, GDW kontaktieren.
Der gelieferten Anhängerkupplung ist montiert für lagerung, bite unterreilen abmontieren!!!
Garantie :
-
Die angegeben max. Anhängelast, "D" en "S" Wert, möchten nicht hinüberschritten werden.
-
Nach 1.000 Km gebrauch und weinigstens 1 Mahl pro jahr muss Anhängerkupplung nachgeprüft
werden :
o Alle Bolzenverbindungen nachprüfen und nachziehen falls nötig.
o Beschädigung an Farbe wiederherstellen.
o Falls Anhängerkupplung durch eine Extreme Belastung getrefft werd muss diese ersetzt
werden.
o Die Interne Teile von abnehmbar System einfetten.
Gebrauch :
-
Falls Kugel von Anhängerkupplung Kennzeichen oder Nebelscheinwerfer ganz oder zum Teil
bedeckt muß diese, wann nicht gebraucht, entfernt werden.
MUST BE KEPT IN THE VEHICLE
IN FAHRZEUG BEWAHREN

Publicité

loading