Operation - McCulloch SUPERLITE 4528 Manuel D'utilisation

Masquer les pouces Voir aussi pour SUPERLITE 4528:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 98
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
Stop the engine and make sure that the cutting
equipment stops. Let the product become cool
before you do the maintenance.
Disconnect the spark plug cap before you do the
maintenance.
The exhaust fumes from the engine contain carbon
monoxide, an odourless, poisonous and very
dangerous gas that can cause death. Do not run the
product indoors or in closed spaces.
The exhaust fumes from the engine are hot and can
contain sparks. Do not run the product indoors or
near flammable material.
Introduction
WARNING:
safety chapter before you use the product.
Fuel
This product has a two-stroke engine.
CAUTION:
result in engine damage. Use a mixture of
gasoline and two-stroke oil.
Premixed fuel
Use McCULLOCH premixed alkylate fuel for best
performance and extension of the engine life. This
fuel contains less harmful chemicals compared
to regular fuel, which decreases harmful exhaust
fumes. The quantity of remains after combustion is
lower with this fuel, which keeps the components of
the engine more clean.
To mix fuel
Gasoline
Use good quality unleaded gasoline with a maximum
of 10% ethanol contents.
CAUTION:
an octane grade less than 90 RON/87
AKI. Use of a lower octane grade can
cause engine knocking, which causes
engine damages.
8
Read the warning

Operation

Read and understand the
Incorrect type of fuel can
Do not use gasoline with
Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use original accessories.
If the maintenance is not done correctly and
regularly, there is an increased risk of injury and
damage to the product.
Only do the maintenance as this operator's manual
recommends. Let an approved McCULLOCH service
agent do all other servicing.
Let an approved McCULLOCH service agent do
servicing on the product regularly.
Replace damaged, worn or broken parts.
Two-stroke oil
For best results and performance use McCULLOCH
two-stroke oil.
If McCULLOCH two-stroke oil is not available, use a
two-stroke oil of good quality for air-cooled engines.
Speak to your servicing dealer to select the correct
oil.
CAUTION:
oil for water-cooled outboard engines,
also referred to as outboard oil. Do not
use oil for four-stroke engines.
To mix gasoline and two-stroke oil
Gasoline, liter
5
10
15
20
CAUTION:
the ratio of the mixture drastically when you
mix small quantities of fuel. Measure the
quantity of oil carefully and make sure that
you get the correct mixture.
Do not use two-stroke
Two-stroke oil,
liter
2% (50:1)
0.10
0.20
0.30
0.40
Small errors can influence
1255 - 003 - 10.03.2022

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ergolite 6028

Table des Matières