König SAS-DUMMYMS10 Mode D'emploi page 2

Introduction:
This professionally looking dummy motion sensor has a deterring effect on
burglars. It is equipped with a LED indicator that flashes every 20 seconds and
is easy to install.
• We recommend that you read this manual before installing/using this
product.
• Keep this manual in a safe place for future reference.
Specifications:
• Housing: plastic
• IP protection: only for indoor use
• Battery: 2x AAA 1.5 V (not incl.)
• Dimensions: 58 x 106 x 38 mm (bracket not incl.)
• Weight: 42 g (batteries not incl.)
Placing the batteries
1. Open the battery compartment at the
backside of the motion sensor.
2. Place two 1.5 V AAA batteries
conforming to the polarity marking
inside the battery compartment.
Close the battery compartment after
placing the batteries.
2
ENGLISH