The device is used for heating domestic hot water /heating circuit water in a sealed storage tank made from metal. A regulator in the form or a control
knob is used to set the required temperature for the water. The water temperature should be 60°C. It is labelled by a marking. An integrated safety
temperature limiter (STB) prevents overheating by shutting down the device at 95°C.
ATTENTION
Device damage due to limescale deposits!
At temperatures > 60°C, limescale formation on the heating elements increases greatly. Heating performance is impaired.
•
Avoid temperatures > 60°C.
3.1
Identification
The nameplate provides information on manufacturer, year of manufacture, part number and technical data. The nameplate is attached to the device
housing.
Information on nameplate
XXX
Typ/Type
Spannung/voltage
Druck/pressure
Leistung/power
Schutzart/protection class
Kunden Art.-Nr./ costomer code
Seriennummer/ serial number
Meaning
Reflex logo, Reflex address, CE
mark
Device type
Supply voltage
Maximum allowable pressure
Capacity
Type of protection
Customer article number
Serial number
EEHR Electric screw-in heating element — 01.03.2021