Functions And Features; Operating And Indicating Elements - IFM Electronic ecomat 200 DA 340 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Functions and features

The digital display is a universal unit for displaying and monitoring analog signals.
The unit:
• picks up the signals of analog sensors
• processes them into a displayed value according to the parameters set
• and indicates the current displayed value in the display.
• In addition the unit switches transistor outputs
- OUT 1: switches when the preset minimum value has been exceeded or not been
reached
- OUT 2: switches when the preset maximum value has been exceeded
- OUT 3: switches when the display value 0 has been reached.
The setting of the various parameters ensures that the function of the unit is vari-
able within a great range of values and can thus be adapted to the individual appli-
cation:
• configuration of the inputs and the display
(operating mode, scaling, decimal point, offset, linearisation, mean-value genera-
tion),
• configuration of the outputs
(preset, switching function, fleeting, start-up delay).

2. Operating and indicating elements

1
Programming button: changeover to the programming mode
2
Setting buttons up/down: selection of the parameter address and the parameter value
Setting step by step by pressing the button once or continuously by pressing it permanently
3
Quick run: pressing the setting and programming buttons once at the same time (1)
4
Input button: acknowledgement of the parameter address and the parameter value
5 LED displays:
K1 is lit: unit is ready for operation
5
K2 is lit: output "min" is switched (set minimum value has been reached)
K3 is lit: output "max" is switched (set maximum value has been reached)
K4 is lit: output "display 0" is switched (displayed value 0 has been reached)
6
display (input values, parameter addresses and parameter values)
P
1
2
3
DIGITAL DISPLAY
4
5
6
DA 340
11

Publicité

Table des Matières
loading

Table des Matières