Publicité
Les langues disponibles
Les langues disponibles
REMOTE CONTROL
Charging the battery via a wall
socket:
1. Open the cover for the USB
connector on the remote control unit
(15).
2. Plug the remote control into the
mains supply using the charger.
Charging the battery via a computer:
1. Open the cover for the USB
connector on the remote control unit
(15).
2. Plug the remote control into the
computer using the USB cable.
Caution: Do not use the glasses
when the battery is being charged.
Earphone socket.
1. Open the cover for the USB
connector on the remote control unit.
2. Plug the earphones into the
remote control.
Download the MP3 songs.
To record MP3 songs, first plug the
remote control into the computer
using the USB cable. Then press the
On/Off/Timer button for 3 seconds to
switch the unit on and transfer the
songs.
(Songs
transferred if the unit is switched on).
USE
To switch the device on, press and
hold the On/Off/Timer key (1) for 3
seconds.
The device will start operating and
the On/Off indicator will light up. The
default settings for the Sonno glasses
are as follow: 5 minute session, air
pressure and heat massage.
symbols for the activated functions
(11,12) will appear on the screen.
To choose another function, use the
up (2) or down (6) keys to highlight
the desired function and a tick will
appear
to
function (9). To activate the selected
function, press the Mode key (4). To
deactivate
press and hold the Mode key (4).
You can also change the mode of the
selected function by pressing the left
(3) or right (5) selection keys.
Air pressure massage
To choose a desired mode, use the
up (2) or down (6) selection keys to
select the air pressure massage
function, activate it by pressing the
Mode button (4) (assuming the air
pressure function is not already
enabled) and select the desired mode
by pressing the left (3) or right (5)
selection keys.
Mode 1 / Mode 2 / Mode 3 / Mode 4
Vibration massage
To choose a desired mode, use the
up (2) or down (6) selection keys to
select the vibration massage function,
activate it by pressing the Mode
button (4) (assuming the vibration
10
can
only
indicate
the
the
selected
be
The
selected
function,
Publicité
