Midland XT-5 Manuel De L'utilisateur page 19

CTCSS sub-audio tone setting
The CTCSS sub-tones, are code numbers (from 1 to 38) that can be added to
the first 8 channels in order to create a new private channel. You can add up to
38 codes to the channels. For example if you add the CTCSS sub-tone "27"
to the channel "3" you will obtain the new channel "327" that will be able to
communicate to other transceivers only if they will be set on the same channel
and sub tone.
To activate 38 different CTCSS sub-tones follow these steps:
1. Turn on the radio.
Press the Menu button and select with the ▲/▼ buttons one of the 8
2.
channels.
3. Press the Menu button again until the display shows the selected channel
with the flashing two CTCSS sub-tone digits (on the right of the channel)
4. Select with the ▲/▼ buttons the desired CTCSS tone (from 1 to 38).
5. To confirm the setting press PTT.
Now the radio transmits and receives using the programmed CTCSS sub-
tone. If you don't want to use any CTCSS tone, select "oF".
Keypad beep off
Everytime you press any button, you will hear a beep sound. To deactivate it
press Menu 5 times. Then select "oF" with the ▲/▼ controls and confirm your
selection by pushing PTT. To enable the beep again, repeat the same procedure
and select "ON".
XT5 instruction guide | 17