GE Appliances UCG1650LII Instructions De Montage page 3

CLEARANCES
• You should be able to fully open the compactor
drawer. Six inches (15.2 cm) is required on the
right side of the compactor for bag removal.
• Allow 23 inches (58.4 cm) in front of the
compactor to remove the drawer.
• This compactor is designed as a built-in
appliance only. It may be located in any
convenient space under a countertop.
DO NOT OPERATE FREE-STANDING.
• The compactor may be installed beneath
countertops of stone or other materials that will
not accept screws. No trim kit is required.
The compactor must be securely installed in
a cabinet that is firmly attached to the house
structure. Weight on the compactor drawer
could cause the compactor to tip and result in
injury. Never allow anyone to climb, sit or hang
on the compactor drawer.
ADVANCE PLANNING
3
MODEL WITH A CUSTOM DRAWER
PANEL - UCG1650LII
The custom drawer panel and custom handle of
your choice should be secured to the compactor
before installation begins. A template with
instructions and installation hardware is provided
with this model.
For planning purposes, you may order the
template in advance by calling GE Appliances
at 1.800.GE.CARES (1.800.423.2737) or by
visiting our website at GEAppliances.com in the
United States. In Canada, call 1.800.561.3344
or visit GEAppliances.ca.
Order Pub. No. 31-31582. Complete panel
installation instructions are included on the
template.
CUSTOM PANEL SIZE REQUIREMENTS:
Maximum panel weight is 12 LBS (5.4 kg).
(1.9 cm)
Thick
Custom
Panel
(37.8 cm)
(74.5 cm)