Sangean PR-D8 Mode D'emploi page 30

Trouble shooting/Reset Button
If the radio fails to operate correctly or some digits on the display
are missing or incomplete, perform the RESET procedure.
1. Turn the radio off and remove the batteries.
2. With the aid of a suitable implement (the end of a paper clip or
a pen), press the RESET button located inside the battery
compartment for at least 1 second, this will reset the
microprocessor, clock time and clear all stations stored in the
preset memory.
Care and Maintenance
Do not allow this radio to be exposed to water, stream or sand.
Do not leave the radio where there's excessive heat, which it could
cause damage such as in a parked car.
Technical Information
Power Source:
Ac Power Adapter:
DC 9V 0.7A, center pin positive, diameter of center tip 2.2
Battery:
4 x UM-2(C size, LR14), Alkaline or Ni-MH rechargeable battery
29