Start-Up - ADE TD 1902 Mode D'emploi

Start-up

For use, you need two 1.5 V LR03 (AAA) batteries.
Remove the battery compartment cover and
remove the old battery.
1. Press the locking tab of the battery
compartment cover down and remove the
battery compartment cover.
2. Insert the batteries as shown on the bottom
of the battery compartment. Pay attention
to the correct polarity (+/-).
3. Replace the battery compartment cover. The
locking tab must snap audibly into place.
Notes on changing the battery:
‚ The batteries must be changed when
nothing is shown on the display.
‚ Only use the battery type specified in the
"Technical Data".
‚ Dispose of old batteries in an environmentally
friendly manner, see "Disposal".
36