SCS Sentinel speeCup Manuel D'installation Et D'utilisation page 18

EN
Connecting with iPhone
1. Turn the Bluetooth feature of the iPhone to ON. It will
then begin searching for any Bluetooth device within
range.
3. You will see speeCup on the Devices list. Touch the
speeCup to pair, and you will see that it's Connected.
2. Make sure the speeCup is turned to the ON position,
then press and hold the smartControl for about 3 seconds
until the orange and blue LED flash alternately.
- 18 -
NOTICE_SPEECUB_IndA_V1213.indd 18 02/12/2013 17:40:04