SCS Sentinel speeCup Manuel D'installation Et D'utilisation page 15

CHARGING
speeCup has a built-in Li-ion battery (3.7V, 1.6A), so it can
be used without connecting to a power supply. To charge
the battery, follow these steps:
1. Connect the micro USB connector to the speeCup DC
5V input.
2. Plug the USB full-size connector into the 12V accessory
car plug supplied.
3. A common USB type AC charger (DC 5V, 500mA) can
be used as well.
4. speeCup can be charged by plugging the USB
connector into a computer.
• When speeCup is charging the LED status indicator
• From fully discharged battery to full charge will take
• A fully charged speeCup will last for up to 20 hours
NOTICE_SPEECUB_IndA_V1213.indd 15
will be RED. When fully charged the RED status
indicator LED will go off.
several hours.
of use.
- 15 -
EN
02/12/2013 17:40:03