Philips NT5175 Mode D'emploi page 10

ENGLISH
10
4 Move the comb over the eyebrow from the outer tip of the eyebrow
towards the base of the nose (against the direction of hair growth).
Shaping with the precision trimming head
You can use the precision trimming head to shape and maintain your
beard, sideburns and neck hair. You can also use the precision trimming
head to trim neck hair.
General
1 To detach the trimming head from the motor unit, turn the trimming
head anticlockwise until the locking indicator points to the 'unlocked'
indication. Then pull the trimming head off the handle.
2 To attach the precision trimming head, align the locking indicator
with the 'unlocked' indication and put the precision trimming head
on the handle. Then turn the precision trimming head clockwise until
the locking indicator points to the 'locked' indication (I).
3 To switch on the appliance, turn the battery compartment cover to
the right until the setting indicator points to the 'on' indication (I).
4 Use the appliance as described in the sections below 'Precision
trimming with precision trimming comb' and 'Precision trimming
without precision trimming comb'.
5 To switch off the appliance, turn the battery compartment cover
closckwise until the setting indicator points to the 'off' indication (0).
Precision trimming with precision trimming comb
With the precision trimming comb, you can trim to a length of 3mm.
Note: When you use the precision trimming head for the irst time, always put
the precision trimming comb on the precision trimming head.