Philips HC7450 Mode D'emploi page 10

EnglisH
10
3 Make well-controlled movements. Touch the hair lightly with the
trimmer.
using the beard comb (HC7450/80, HC5450/80 only)
The hair length settings are indicated in millimeters, the comb cuts the hair
to a length of 1mm to 23mm. The settings correspond to the remaining
hair length after cutting.
1 Attach the comb onto the appliance.
2 Turn the adjustment ring to the desired length setting.
3 Switch on the appliance.
4 To trim most effectively, move the trimmer against the hair growth
direction. Make sure the surface of the comb always stays in contact
with the skin.