Electronic Key - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

- When the key is removed, it prevents unauthorized use of the transmitter.
Preferably, the electronic key should be removed after pressing the stop palmswitch button. Removal
of the key before the stop palmswitch button button is pressed will result in a fault indication (4
flashes) and passive shutdown of the receiver.
    
The transmitter cannot be started up without its electronic key.
The transmitter URE also has an internal memory containing an identity code.
- If the identity code of the electronic key matches the identity code stored in the URE, the transmitter
can be started up.
- If the identity code of the electronic key and that of the URE do not match, the transmitter indicates
the problem by its two indicator lights (3 flashes). In this case, perform the programming procedure
described in § 6.3.4.
URE can be started up provided :
Transmitter identity code = Electronic
key identity code
Implementation of the electronic key in the transmitter housing :
1- Set up the electronic key in the place foreseen for that purpose on the transmitter
2- With screwdriver with flat blade or with a coin, turn the electronic key of 1/4 of clockwise turn until
blocking.
In the event of a transmitter failure :
You can recover the electronic key and connect it on a maintenance transmitter (button configuration
should be the same as that of the failed transmitter, otherwise, buttons that are different will be
ineffective.).
To perform this operation, you must reprogram the key identity code in the new transmitter URE as
described in the procedure in § 6.3.4.
If your electronic key is lost :
You can order another electronic key (reference URWE21-B) making sure to specify the following
information on the order :
- The unique 6-digit number of the old key (written on the cover page of this manual when you
unpacked your product).
or, if you do not have the key number :
- the associated receiver identity code (on receiver descriptive label) and transmitter button
configuration
This information will allow you to receive an electronic key identical to the old one containing all the
parameters indicated above for your radio remote control.
UR - 323245J
électronique
Identity code
contained in
transmitter URE
électronique
1
électronique
Identity code contained
in electronic key
électronique
2
DE EN FR
- 57 -