How To Replace: Lamp; Troubleshooting; What To Do If - Electrolux KVLBE08T Notice D'utilisation

TROUBLESHOOTING

Install the shelf supports in the opposite sequence.

11.3 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.

12.1 What to do if...

The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
66/224
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if the oven is correctly connected to the
electrical supply.
Put a cloth on the bottom of
the cavity.
Remedy
Step 3