abc CombBind C150Pro Manuel D'utilisation page 4

Specifications
Operation Mode
Max. Punch Capacity per lift
(80 gsm)
Max Punch Capacity per lift Foils/
PVC Covers
Max. Approx. Binding Capacity
(80 gsm)
Paper Formats
Max Binding Element Cap
De-Selector Pins
Margin Depth Selector
Machine Dimensions mm
(HxWxD mm)
Weight
Punching capacity, plastic foils
Setting up
1 Attach the handle to the machine on the right side and thread the
screw into the hole at the end of the square shaft to complete the
installation.
Punching
With the handle in the upright position, insert sheets into machine,
1
making sure they are flush into the machine. (Use the side guide to
adjust the position of the document before punching (fig. 1).
2 Pull the handle down to punch. Return the handle to original upright
position. Remove paper (fig. 2).
Note: The black knob on the right side of the machine is used to
select the margin depth. This feature is ideal for thicker documents
that require wider margins for easy page turning and more secure
binding. (C250 Pro Only) (fig. 3).
Custom Binding
CombBind C250Pro has 21 de-selectable punching pins which make
it possible to punch virtually any length of document. Simply select or
deselect the pins to adjust the punching pattern as required.
Guarantee
Operation of this machine is guaranteed for two years from date of
purchase, subject to normal use. Within the guarantee period, Acco
Brands Europe will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made by
Register this product online at www.accoeurope.com
4
GBC CombBind C250Pro GBC CombBind C150Pro
Manual Manual
20 20
2 x Foils/PVC Covers (0.2mm) 2 x Foils/PVC Covers (0.2mm)
450 450
A4, A5, US Letter, A4, A5, US Letter,
51mm 51mm
Full 21 disengageable Fixed 21 Ring
Fixed
3
380 x 300 x 240 385 x 300 x 210
10.4kg 8.7kg
Max 2 foils of 0,2 mm each Max 2 foils of 0,2 mm each
Location of controls
1 Punching Handle/Comb Opening Handle
2 Comb Opening Teeth
3 De-selectable punching pins
(C250Pro Only)
4 Punching Slot
5 Paper Edge Guide
6 Clippings Drawer
7 Margin Adjuster (C250Pro Only)
8 Comb Opening Lock (C250 Pro Only)
Binding
1 Place binding element, open side up, behind metal fingers (fig. 4).
Push handle to the rear to open rings (fig. 5).
2
3 Insert paper vertically, front cover facing you (fig. 6).
Lay down paper horizontally (fig. 7).
4
Return handle to upright position to close rings.
5
Lift vertically to remove bound document (fig. 8).
6
Note: The black knob on the left hand side of the machine can be
set to lock in comb opening settings. The handle stops automatically
at the same position each time for quicker operation during long
binding runs. Simply turn the knob clockwise to open, pull handle
to desired opening, then turn the knob counter-clockwise to lock.
(C250 Pro only)
Maintenance
Always remember to regularly empty the drawer of clippings.
persons not authorised by Acco Brands Europe will invalidate the
guarantee. It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect the legal rights
which consumers have under applicable national legislation governing
the sale of goods.
G