Explanation Of The Pictograms On The High-Speed Mixer - Baier BSM 287 Traduction Du Mode D'emploi Original

EN
2.6.7 Explanation of the pictograms
on the high-speed mixer
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been
subjected to the prescribed conformity
assessment procedures.
Protection class II equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. It does
not have a protective earth conductor.
Protection class I equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. An
additional safeguard becomes active if the
basic insulation fails.
Environmentally friendly disposal of
waste equipment
Waste equipment contains valuable
recyclable materials which should be
reused or recycled. Batteries, lubricants
and similar materials must not be allowed
to get into the environment.
Therefore, please dispose of waste
equipment through suitable collection
systems.
Read the instruction manual
Before starting any work with or on the
tool, this instruction manual, the safety
instructions and the warnings must be
read through carefully and observed.
| 26 |