AGA marvel M18AF Mode D'emploi page 3

WARNING
!
EXCESSIVE WEIGHT HAZARD
Use two or more people to move product.
Failure to do so can result in back or other injury.
Remove Interior Packaging
Your freezer has been packed for shipment with all parts
that could be damaged by movement securely fastened.
Remove internal packing materials and any tape holding in-
ternal components in place. The owners manual is shipped
inside the product in a plastic bag along with the warranty
registration card, and other accessory items.
Important
Keep your carton and packaging until your freezer has
been thoroughly inspected and found to be in good condi-
tion. If there is damage, the packaging will be needed as
proof of damage in transit. Afterwards please dispose of all
items responsibly in particular the plastic bags which can
be a suffocation hazard.
Note to Customer
This merchandise was carefully packed and thoroughly
inspected before leaving our plant. Responsibility for its
safe delivery was assumed by the retailer upon acceptance
of the shipment. Claims for loss or damage sustained in
transit must be made to the retailer.
DO NOT RETURN DAMAGED MERCHANDISE TO THE
MANUFACTURER - FILE THE CLAIM WITH THE RE-
TAILER.
CAUTION
!
If the power module was shipped or has been laying on
its side for any period of time allow the power module to
sit upright for a period of at least 24 hours before plugging
in. This will assure oil returns to the compressor. Plugging
the power module in immediately may cause damage to
internal parts.
UNPACKING YOUR FREEZER
Help Prevent Tragedies
Child entrapment and suffocation are not problems of the
past. Junked or abandoned freezers are still dangerous -
even if they sit out for "just a few days".
If you are getting rid of your old freezer, please follow the
instructions below to help prevent accidents.
Before you throw away your old freezer:
•
•
Tools to have available for installation:
•
•
•
•
•
•
•
•
•
•
•
3
CAUTION
!
Take off the doors or remove the drawers.
Leave the shelves in place so children may not easily
climb inside.
Phillips screwdriver
Flat blade screwdriver
Hex head nut drivers size
Level
Drill and drill bit (#6 - .204)
Open end wrenchs size ⁄
1
4
Slip joint pliers
Adjustable wrench
Tape measure
Hex socket and ratchet size
3/32" Hex key (Allen wrench)
⁄ " and ⁄ "
1 5
4 16
", ⁄ " and ⁄ "
7 1
16 2
⁄ "
7
16