Important Safety Information; Installation Instructions; Features - Danby DUF082A1BSLDD-RM Guide D'utilisation Et Soins De Propriètaire

GROUNDING
INSTRUCTIONS
This appliance is equipped with a cord having a ground-
ing wire with a grounding plug. The plug must be
connected to an outlet that is properly installed and
grounded.
WARNING
Improper use of the grounding plug can result in
a risk of electric shock. Consult a qualifi ed electri-
cian of serviceman if the grounding instructions
are not completely understood, or if doubt exists
as to whether the appliance is properly grounded.
Remove exterior and interior packings, wipe the
outside thoroughly with a soft dry cloth and the inside
with a wet, lukewarm cloth. Avoid placing the cabinet in
a narrow recess or near any heat source, direct sunlight,
or moisture. Let air circulate freely around the cabinet.
Keep the rear of the freezer 5 inches away from the
wall.
Location:
1) Select a place with a strong, level f oor.
1) THERMOSTAT DIAL: For controlling the temperature
inside the freezer. Turns the motor on as soon as the
temperature rises above the desired level.
2) REFRIGERATED SHELVES:3 full width refrigerated
shelves.
3) MAGNETIC GASKET: Tight f tting door seal keeps all
the cooling power locked inside. No hooks or latches.
4) DOOR BINS (4)
5) DRIP TRAY

IMPORTANT SAFETY INFORMATION

This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.

INSTALLATION INSTRUCTIONS

DO NOT USE AN EXTENSION CORD
Use an exclusive wall outlet; Do not connect your freezer
to extension cords, or together with any other
appliance in the same wall outlet. Do not splice the cord.
IMPORTANT WARNING
An empty freezer is a very dangerous attraction to
children. Remove either the gasket, latches, lids, or
doors from unused appliances, or take some other
action that will gaurantee it harmless.
2) Allow 5 inches of space between the back of the
freezer and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may
affect the acrylic coating. Heat sources nearby will cause
higher electricity consumption.
4) Avoid very moist places. Too much moisture in the air
will cause frost to form very quickly on the
evaporator, and your freezer will have to be defrosted
more frequently.

FEATURES

1
2
3
1
DON'T WAIT DO IT NOW!
5
4