Olivetti OLIBOARD Manuel De L'utilisateur page 3

INSTRUCTION: provides additional software instructions.
NOTE: describes problems that could occur when using the whiteboard
and how to avoid and resolve them.
WARNING:
Caution Warning
•
In order to avoid electric shocks, do not install the interactive whiteboard in
damp or smoky environments.
•
After the interactive whiteboard is installed, avoid touching its power and
data cables.
•
Keep the interactive whiteboard away from open flames, electrical contacts
and direct sunlight.
•
After the interactive whiteboard is installed, make sure that it is fixed securely.
•
Avoid looking directly at the beam of light emitted by the projector onto the
whiteboard.
•
Do not touch the projector because it could be hot even after only a few
minutes of operation. Refer to the projector manual for all warnings and rules
relating to its use.
•
Do not hang onto the support stand of the projector.
When the whiteboard is mounted on a pedestal, be careful not to trip over the
pedestal.
OLIBOARD – Interactive Whiteboard
draws attention to the danger of personal injury or
product damage if improperly used.
III