OHAUS Ranger 3000 Série Mode D'emploi page 4

EN-2
Rechargeable Battery Power
Allow the battery to charge for 12 hours before using the scale on battery power. The instrument can be operated during
charging, and the battery is protected against overcharging. For maximum operating time, the battery should be charged at
room temperature.
2.3 Levelling the Instrument
To level the instrument, adjust the feet/leveling wheel so the bubble is centered in the circle of the level indicator. Be sure the
equipment is level each time its location is changed.
3. OPERATION
3.1 Overview of Display, Home Screen
CONTROLS
Button
Primary Function
(Short Press) Turns the scale
on
If scale is On,
sets Zero
Secondary
Function
Turns the scale
(Long Press) Off.
Menu Function
(Short Press) Accepts the
current setting
on the display.
1
Notes: Short Press: Press less than 1 second.
2
Long Press: Press and hold for more than 2 seconds.
Symbol Charge level
0 to 10 % Remaining
11 to 40 % Remaining
41 to 70 % Remaining
71 to 100 % Remaining
On/Zero Print
Sends the
current value to
the selected
COM ports if
AUTOPRINT is
set to Off.
Off Units
Changes the
weighing unit.
Yes No
Advances to the
next menu or
menu item.
Rejects the
current setting
on the display
and advances to
the next
available setting.
RANGER
Function
Accumulates the
Initiates an
weight or
application
displays the
mode.
accumulated
information at 0
load.
Mode
Allows changing Enter the User
the application menu.
mode.
Back
Moves Back to Exits the User
previous menu menu.
item.
Aborts the
calibration in
progress.
TM
3000 SERIES
M+ Tare
Enter/clear a
tare value.
Clears the
accumulation
when the
accumulation
information is
displayed.
Menu
Exit