Intended Use; Basic Safety Information - Burkert 8200 Manuel D'utilisation

Intendeduse
2.

inTenDeD use

use of the direct welding holder that does not comply with
the instructions could present risks to people, nearby installa-
tions and the environment.
• The 8200 direct welding holder is a holder welded onto a pipe
and into which an analytical probe is inserted.
• Use the holder in compliance with the specifications and
conditions of commissioning and use given in the contractual
documents, in these operating instructions and in the operating
instuctions for the device which is inserted into it.
• Safe and trouble-free operation of the holder depends on its
proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use the holder as intended.
→
Observe any existing restraints when the holder is exported.
Type 8200
3.

bAsic sAfeTy informATion

This safety information does not take into account:
• any contingencies or occurences that may arise during installation,
use and maintenance of the holders.
• the local safety regulations for which the operating company is res-
ponsible including the staff in charge of installation and maintenance.
Danger due to high pressure in the installation.
Danger due to high temperatures of the fluid.
Danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care:
• Prevent any unintentional power supply switch-on.
• To ensure that installation and maintenance work are
carried out by qualified, authorised personnel in possession of
the appropriate tools.
• Use the holder only if in perfect working order and in com-
pliance with the instructions provided in the instruction manual.
• To replace defective parts immediately.
• Observe the general technical rules when installing and using
the holder.
• Not to fix, assemble or maintain the holder in explosive
atmospheres.
English
5