Publicité
THE PICTURES BELOW INTEND TO MAKE YOU FAMILAR WITH DIFFERENT FUNCTIONS OF YOUR IMPACT DRILL.
THESE PICTURES MAY NOT SHOW THE ACTUAL IMPACT DRILL MODEL THAT YOU HAVE PURCHASED. BEFORE
ANY INTERVENTION, YOUR ANGLE GRINDER MUST BE UNPLUGED FROM THE POWER SOURCE.
PICTURE 2: INSERTING ACCESSORIES
USE CHUCK KEY (1) TO ADJUST THE OPENING OF
THE CHUCK JAW BEFORE INSERTING THE DRILL.
PICTURE 3: "ON/OFF" + CONTINUOUS OPERATION
FUNCTIONS
ONCE THE PLUG IS CONNECTED TO THE POWER
SOURCE, DEPRESS THE "ON/OFF" SWITCH (1) TO
START THE IMPACT DRILL, AND RELESE THE "ON/OFF
SWITCH TO STOP THE IMPACT DRILL.
IF YOU PRESS THE "LOCK-ON" BUTTON (2) WHILE THE
"ON/OFF" SWITCH IS DEPRESSED, THE IMPACT DRILL
CAN OPERATE CONTINUOUSLY. TO RELEASE THE
"LOCK-ON"
BUTTON,
PRESS
SWITCH.
Ref.:647061; 647063
IMPACT DRILL IN OPERATION
PICTURE 4: "FORWARD / REVERSE" FUNCTION
DEPLACE THE "FORWARD / REVERSE" LEVEL ON THE
LEFT OR ON THE RIGHT SIDE TO CHOOSE THE
DIRECTION OF THE ROTATION.
PICTURE
FUNCTION
NOTE: DEPENDING ON THE MODELS OF THE IMPACT
DRILLS, THE DRILL / HAMMER SWITCH CAN BE
LOCATED ON DIFFERENT PARTS OF THE POWER
TOOL BODY. IN THE PICTURE BELOW, THE DRILL /
HAMMER FUNCTION IS LOCATED ON THE SIDE.
TO
POSITION THE DRILL/HAMMER SELECTION BUTTOM
APPROPRIATELY.
ON
THE
"ON/OFF"
12
5:
SELECTING
"DRILL
SELECT
THE
DRILL/HAMMER
OR
IMPACT"
FUNCTION,
Publicité
