Fakir Prestige SC 190 Mode D'emploi page 37

15
Approximate picture
Floor suction nozzle [E]
E
You can adjust the floor suction nozzle with a working width
14
of approx. 28 cm by using the change-over switch [14] for the
vacuuming of carpets (bristle collar retracted), or hard floors
(bristle collar extended).
The two thread receptacles [15] remove threads, hairs, fluff
etc. from the carpet. If required, they can be replaced without
problem since they are only inserted into the base plate to
the left and right of the suction opening in each case.
Set suction capacity medium to high.
Hard-floor nozzle [16]
Used especially for hard-floors such as tiles, parquet or lami-
nate. Soft brush hairs allow the nozzle to glide easily over the
16
floor and it picks up even the finest dirt free of residue.
Set suction capacity low to medium.
Textile nozzle [17]
Used especially for upholstered furniture, curtains or gar-
ments. Perfect dust removal through extra-large lint and thre-
17
ad receptacle, which removes statically-clinging lint and hair.
Set suction capacity medium to high.
Nozzles Kapitel Düsen
NOTICE!
NOTICE!
NOTICE!
> Optional accessory
Order No. 2725810
GB
37