How To Clean And Store The Product; How To Clean The Product; How To Store The Product - Richway & Fuji Bio BIO-BELT 7000 Manuel De L'utilisateur

How to clean and store the product

How to clean the product

Unplug the BIO-BELT before cleaning it. Use a moist towel to remove any dust on the surface and
1.
a soft dry fabric to clean the controller.
2. We recommend wiping the clear strip on the BIO-BELT once a month with a moist towel to maintain
good condition.
- Do not leave any moisture on the BIO-BELT after cleaning the product.
- If the BIO-BELT has any moisture or perspiration on it, use a dry towel to wipe it off.
3. Do not use detergents, solvents, or flammable chemicals when cleaning the BIO-BELT and controller.
▪ When cleaning the BIO-BELT, do not wash with water, submerge in water, or dry clean.
- Doing so may cause electric shock or a short circuit.
Caution
▪ When cleaning the BIO-BELT, make sure to turn off the power and unplug it.

How to store the product

▪ When not in use, turn off the power and unplug the BIO-BELT.
▪ Before storing the BIO-BELT, be sure to turn it off and wait until it has cooled down.
▪ Store the BIO-BELT lying flat (not folded) and in a well-ventilated area.
▪ Unplug the controller from the BIO-BELT and place it in a bag.
▪ Do not expose the device to water, rain or extreme humidity. It may cause electric shock or fire.
Product Storage/
Transportation
11
- Storage Temperature: 32 ~ 113°F / 0 ~ 45°C
- Transportation Temperature: -13 ~ 158°F / -25 ~ 70°C
- Humidity: 15 ~ 93%
- Air pressure: 700 ~ 1060 hPa
- Keep out of direct sunlight.
- Store in an area free of dust and humidity.