How To Use The Product; Turning On And Off - Richway & Fuji Bio BIO-BELT 7000 Manuel De L'utilisateur

How to use the product

Turning ON and OFF

Check the following to make sure the BIO-BELT is operating properly.
The BIO-BELT can be used on the legs, arms, shoulders, and waist. Its small size makes it easy to trans-
port.
Turn the BIO-BELT on by pressing the Power button. The indicator light will turn on. Press the but-
1.
ton again to turn off the BIO-BELT.
2. If the light does not turn on, check for any plug/power system problems.
3. Press the temperature adjustment button to see if it is working property. Contact our Customer
Service Center if the controller is not working properly.
4. The BIO-BELT will automatically turn off after 2 hours of continuous use. To continue using the belt,
turn it on again and set the temperature.
▪ Please contact our Customer Service Center if the power indication light does not turn on
when the power is connected.
Caution
9