Danger Of Electric Shock And Fire; Material And Device Damage - gourmetmaxx MX-446 Mode D'emploi

Danger of Electric Shock and Fire

❐ Only connect the device to a socket that is properly installed and corresponds with the
technical data of the device (see the "Technical Data" chapter).
❐ Position the cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces.
❐ Always turn the rotary switch to position 0 and pull the mains plug out of the socket:
– before you remove and / or insert the mixing container,
– if you do not use the device over a lengthy period of time,
– before a thunderstorm or
– before you clean the device.
❐ When you want to remove the mains plug from the socket, always pull the plug and not the
cable.
❐ Never immerse the motor unit in water or other liquids! Ensure that the motor unit, cable
and plug do not fall into water or become wet.
❐ Should the device fall into water, switch off the power supply immediately.
❐ Never touch the device, cable or plug with wet hands.
❐ Never cover the device with cloths or something similar. There is a danger of overheating!
❐ Maintain a suffi cient distance from sources of heat such as hobs or ovens.

Material and Device Damage

❐ Always check the device for damage before putting it into operation. The device must not be
used if the device, the cable, the plug or any of the accessories show obvious signs of damage.
❐ If the device is broken, do not attempt to repair it yourself. In the event of any damage,
please contact the customer service department.
❐ Use only the accessories supplied, or accessories expressly recommended by the
manufacturer. Use only original spare parts from the manufacturer.
❐ Use the device only when it is completely assembled and undamaged.
❐ Do not leave the device unattended when it is switched on.
❐ Make sure that the device remains stable during operation.
❐ The device should only be used in closed rooms.
❐ Ensure that it is not possible for others to trip over the connected mains cable. Do not allow
the cable to hang over the edge of tables or kitchen counters. Others may become caught
and pull the device down.
❐ Do not drop the device or allow it to be knocked violently.
❐ Always place the device on a dry, even, and fi rm base.
❐ Make sure that your working area is always well lit when using the device.
❐ Do not expose the device to extreme temperatures, wide temperature variations, or direct
sunlight.
❐ The device may not be moved or transported while it is switched on. Always turn the rotary
switch to position 0 and pull the mains plug out of the socket before you move the device.
15