Use; Stop; Start; Waiting Mode - JRI Mini SPY Green Manuel D'utilisation

IV. USE
a)

Stop

When you receive it, your Mini SPY RF GREEN is stopped. Only the time clock is active. It can neither
emit nor receive anything.
b) Start
c)

Waiting mode

The red led will be on 2'' if you press 5'' on the push button. In this case, the Mini SPY RF GREEN is
waiting for programming
Configuration
Mini SPY RF GREEN configuration is done from the Sirius software and then transferred into your
Mini SPY RF GREEN by radio frequency.
d) Measurement start
The Mini SPY RF GREEN has 2 starting mode:

automatic start

manual start
e) Automatic start
Your Mini SPY RF GREEN starts recording:
automatically when the configuration is transferred,
at a programmed date and time:
©JRI Maxant
To start your Mini SPY RF GREEN, please press between 5 and 10"
on the button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- Mini SPY RF GREEN is now in waiting mode
Remark: If you press >10'' => no effect => remains off
Working LED (green):
2'' => starting measurements
then flashes every 1 minute
dd / mm / yy
hh / mm / ss
Working LED (green):
2'' => starting measurements
then flashes every 2''
14