Facom V.PF300F Notice Originale page 8

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Punch diameter
mm
V.PF300F 8
Model Flange capacity
mm
V.PF300F 1,2
* k = measurement uncertainty in dB ** k = measurement uncertainty in m/s²
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT V.PF300F
– FACOM PUNCH AND FLANGE TOOL
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-10: 2011
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
NU-V.PF300F_0716.indd 8
Average Air Supply by Compressor Horsepower
Total average air required (CFM)
0 - 11.9
12.0 - 18.5
18.6 - 24.2
24.3 - 36.4
36.5 - 51.0
51.1 - 66.0
66.1 - 88.2
88.3 - 132.0
132.1 - 176.4
176.5 - 200.0
Punch capacity
Pressure dB(A)
mm
1 81
Air Working
consumption pressure
l/min bar
113 6,2
CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
Conp. Hp
1
1 - 1/2
2
3
5
7 - 1/2
10
15
20
25
Noise level
Power dB(A) Pressure dB(C)
k* k*
3 92 3 79
Weight Dimensions
kg mm
1,1 175
Vibrations level
m/s
2
k* k**
3 2,1 0,7
Markus Rompel
20.03.2016
Director Engineering
08/07/2016 08:26:24