Beper VE.100A Manuel D'instructions page 12

Stand Fan Use instructions
7 – Screw completely with the screw (14) in order that the control panels is well fixed to the intern
pipe (14).
8 – Place the rear grid (6) on the motor, in order that the holes of the grid are well inserted into the
motor of the fan
9 – Strongly and completely screw the rear grid (5) in order to block the grid on the motor.
10 – Insert the blades of the fan (4) on the motor (7) and completely screw the nut blade (3) on the
motor, in order to block the body motor.
11 – Assembly the 2 grid front (1) and rear ones (6) by inserting the closure nut (2), place the front
grid (1), on the rear grid (8). Close the nuts (2) to block the grids.
SPEED SELECTION
Choose the speed desired pressing on the buttons of the control panels (12).
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
When the fan is on, the night light switch on (11).
HEAD INCLINATION
It is possible to choose various positions and change the air flow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired
and screw the air strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
SWING
When pressing the swing button (8), It is possible to activate or disconnect the swing of the fan, by
touching the swing button (8). Swing allow to provide the air uniformly.
To activate the push the swig button (8) down until is completely blocked ; the head fan turns auto-
matically from right to left.
To disconnect the swing raise completely the button (8).
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damaged this appliance.
Do not spray water or other liquids on the fan in order to protect it.
After cleaning, dry every parts before using the appliance.
During the winter and when not used, keep this appliance in a dry and clean place.
12