Parts Cleaning And Replacement - B.A. International Optima EOS350 Mode D'emploi

Extraoral Suction System, Instructions For Use and Installation

7 Parts Cleaning and Replacement

•When installing or removing the suction mouth piece hood, hold it by the connecting
end, instead of by the far end.
•To clean the equipment surface, use a disinfectant wipe and dry with a soft cloth.
•BA INTERNATIONAL recommends to use hydrogen peroxide disinfectant based solution.
7.1 Suction mouth piece hood
[Daily Clean: between patients] Use wiping disinfectant or spray disinfectant to clean the
product surface. BA INTERNATIONAL recommends to use hydrogen peroxide disinfectant
based solution.
[Replacement]
•The suction mouthpiece hood is autoclavable.
•Turn off the power and remove power cord.
•Keep your hands Dry.
•Wear gloves.
•Loosen up the three screws in the suction mouth piece
hood.
•Replace with a fresh hood and tighten up the screws.
• Autoclaveable at 135c with a minimum holding time
of > 3min
• Max temperature for autoclaving: 135℃; max time for autoclaving: 10min.
15