Turn On The Power; Start And Stop - B.A. International Optima EOS350 Mode D'emploi

Extraoral Suction System, Instructions For Use and Installation

6.3 Turn On the Power

• Remove anything that might be inadvertently sucked in to the system.
• Make sure the suction tubes are installed properly.
• Press the "Power"

6.4 Start and Stop

• Make sure the suction mouth piece hood and arms are in the right position. Keep a
distance of 4 Inches between suction mouth piece hood and patient's mouth.Press the
"Start/Stop"
• Press "Plus"
There are 10 power levels you can choose from, please select one depending on the
level of suction power required.
• To end or pause, press the "Start/Stop" button once. Press it again to restart.
Suggestion: After each dental treatment, keep the equipment running for an extra few
minutes to remove possible aerosols, droplets, dust and bacterial pathogens remaining
in the air.
button to turn the equipment on.
botton to let the equipment start working.
and "Minus" button to adjust suction velocity.
13