Serielle Schnittstelle; Wartung Und Pflege; Zubehör; Serial Interface - Thyracont DC1 Mode D'emploi

Table des Matières

Publicité

16

4.7 Serielle Schnittstelle

Regler der Serie DC1 besitzen optional
eine serielle Schnittstelle RS232.
Wird die 9-polige Sub-D-Buchse mittels
Schnittstellen-Kabel (Zubehör) mit einem
PC verbunden, so können Messdaten am
PC aufgezeichnet und graphisch ausge-
wertet werden (Windows-Software Va-
cuGraph siehe Zubehör).
Schnittstellen-Parameter:
2400 Baud, 1 Startbit, 8 Datenbits, 1
Stopbit, no parity, no handshake;
Die Kommunikation erfolgt durch Übertra-
gung von ASCII-code gemäß Thyracont-
Protokoll.

5 Wartung und Pflege

Behandeln Sie das Gerät vorsichtig.
Die Front kann durch ein angefeuchtetes
Tuch gereinigt werden.
6 Zubehör
Als Zubehör ist erhältlich:
Externes Vakuumventil, vernickelt, mit
1,5m Kabel (PTFE-Ventil a. Anfrage)
Stativhalterung
Software VacuGraph zur Messdaten-
Erfassung und Darstellung am PC.

4.7 Serial Interface

Controllers of type DC1 are optionally
equipped with a serial interface RS232.
If the 9-pole Sub-D-socket is connected to
a PC by the interface cable (accessory),
measurement data can be recorded and
visualized via PC (VacuGraph Windows-
software, see accessories).
Interface Parameters:
2400 Baud, 1 startbit, 8 data bits, 1 stop
bit, no parity, no handshake;
Communication corresponds to Thyracont-
interface-protocol,
transmitting
code.

5 Maintenance

Please handle with care.
The front can be cleaned by a little bit wet
cloth.

6 Accessories

The following accessories are available:
External vacuum valve, nickel coated,
1,5m cable (PTFE valve on request)
Stand holder
Software VacuGraph for graphic data
display and measurement via PC.
4.7 Interface Série
Les appareils de contrôle du type DC1
sont équipés en option d'une interface
série RS232. En connectant la prise Sub-
D 9 pôles à un PC avec le câble d'inter-
face (accessoire), les données de mesure
peuvent être enregistrées et visualisées
sur le PC grâce au logiciel VacuGraph de
Windows (voir les accessoires).
Paramètres d'Interface :
2400 Bauds, 1 bit de début, 8 bits de
données, 1 bit d'arrêt, pas de parité, pas
de handshake ;
ASCII-
La communication se base sur le proto-
cole d'interface Thyracont, transmettant
en code ASCII.
5 Maintenance
Manipuler avec précaution.
La face avant de l'appareil peut être net-
toyée avec un chiffon légèrement humide.

6 Accessoires

Les accessoires suivants sont dispo-
nibles :
Valve du vide externe, revêtement
nickel, câble de 1,5m (valve PTFE
sur demande)
Support
Logiciel VacuGraph pour l'affichage
graphique des données et les me-
sures via PC.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dc1p

Table des Matières