afriso Unitop Notice Technique page 40

If the measuring line does not have a steady gradient to the tank or if conden-
sate can collect in the measuring line, use a condensate trap.
Mounting
A
B
C
D
E
A. Measuring line
(pipe/hose)
B. Compression screw
C. Washer
D. Sealing ring
E. Stiffener (only if a hose is
used)
1. Push the stiffener (E) into
the hose.
2. Push the compression
screw (B), the washer (C)
and the sealing ring (D)
onto the measuring line.
3. Push the pipe/hose into
the connection piece all
the way to the stop.
4. Tighten the compression
screw (B).
Unitop
EN
15