Publicité
Les langues disponibles
Les langues disponibles
Safety Tips
Whilst all care has been taken to remove sharp edges, care must be taken when cleaning or handling the trolley to
prevent risk of injury from exposed metal edges.
Assembly
Note: Be sure to check all packaging materials for any small parts that may
have come loose during transportation
To attach the shelves to the frames:
1.
Install 4 x bumpers (6) and 4 x castors (8 & 9) with 4 x sleeves (7) on side frames (1), with the two braked
castors at the front of the Trolley.
2.
Screw 4 x rectangular bars (3) together with 8 x Gaskets (4) to one Side Frame using 4 x screws (5)
3.
Put the 6 round bars (2) into the fixing holes in both Side Frames.
4.
Using 4 x Screws (5) fix the 4 x rectangular bars (3) together with 8 x Gaskets (4) to the other Side Frame.
Cleaning
•
Clean the trolley regularly using a cleaning agent suitable for use with stainless steel.
•
Always remove cleaning agent residue. This can discolour the surface of the trolley.
•
Never leave the trolley surface damp as this can cause discoloration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the right to
1
Telephone Helpline: 0845 146 2887 (United Kingdom)
change specifications without notice.
Publicité
