Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.3 Temperature regulation
The temperature is automatically regula-
ted.
To operate the appliance, proceed as
follows:
• turn the Temperature regulator to-
ward lower settings to obtain the mini-
mum coldness.
• turn the Temperature regulator to-
ward higher settings to obtain the
maximum coldness.
A medium setting is generally
the most suitable.
However, the exact setting should be
chosen keeping in mind that the temper-
ature inside the appliance depends on:

4. DAILY USE

4.1 Movable shelves
4.2 DYNAMICAIR function
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
If the ambient temperature is
high or the appliance is fully loa-
ded, and the appliance is set to
the lowest temperatures, it may
run continuously causing frost to
form on the rear wall. In this case
the dial must be set to a higher
temperature to allow automatic
defrosting and therefore reduced
energy consumption.
The walls of the refrigerator are equip-
ped with a series of runners so that the
shelves can be positioned as desired.
The DYNAMICAIR function let food cool
quickly and a more constant tempera-
ture in the refrigerator.
1
To activate the DYNAMICAIR device
push the switch (1). The green indicator
(2) comes on.
2
Activate the device when the am-
bient temperature more than
25°C.
ENGLISH
21

Publicité

Table des Matières
loading

Table des Matières