How To Unlock The Datashur Personal As Admin; How To Create A New User Pin In Admin Mode - iStorage DATAshur 2 personal Manuel D'utilisation

Instructions
1. Press KEY button once
2. Within 10 seconds begin to enter your User PIN (default
PIN 11223344)
3. Press the KEY button once
4. Press and hold down the number 1 button and press
the KEY button twice (double click) (1 &
5. Within 10 seconds begin to enter your new Admin PIN
6. Press KEY button twice (double click)
7. Within 10 seconds begin to re-enter your new Admin PIN
8. Press KEY button twice (double click)
12. How to unlock the datAshur Personal
Caution: Entering the Admin PIN to access a locked drive will clear the User PIN. For security reasons, we
highly recommend that a new User PIN be created immediately once the drive has been unlocked
using the Admin PIN. Refer to section 13 on page 12.
Instructions
1. Press and hold down the number 1 button and press the
KEY button once (1 &
2. Within 10 seconds begin to enter your Admin PIN
3. Press the KEY button once
Note: Once the datAshur Personal
only, during which time the datAshur Personal
diately by pressing and holding down the KEY button
or by clicking the 'Safely Remove Hardware/Eject' icon within your operating system.

13. How to create a New User PIN in Admin mode

Creating a new User PIN in Admin mode will become necessary if the datAshur Personal
with the Admin PIN, as this will automatically clear the User PIN. To create a new User PIN in Admin mode please follow the
instructions on the table below.
#12
)
)
has been successfully unlocked, the
2
needs to be connected to a USB port. It can be locked down imme-
2
www.istorage-uk.com
LED LED State
Red, Green & Blue
and then the Red
(if Blue LED also blinks this indicates an Admin
PIN has been set up)
Red LED will continue to blink
Red solid LED changing to
indicating successful User PIN entry
Red and Blue LED's flicker together ready to
&
receive new Admin PIN
Red and Blue LED's continue to flicker together
&
Green LED blinks
Green LED continues to blink
Red solid LED changing to
indicating successful Admin PIN entry
as Admin
2
LED LED State
&
Red and Green
Red and Green
&
Red solid LED followed by a flickering
LED indicating successful Admin PIN entry
Green LED will remain on for 30 seconds
for 3 seconds, or waiting for the 30 seconds to expire
has been unlocked for any reason
2
LED's will flash together once
LED will continue to blink
Green solid LED
Green solid LED
LED's flicker together
LED's continue to flicker together
Green