How To Determine The Device Version Number In User Mode; How To Create An Admin Pin - iStorage DATAshur 2 personal Manuel D'utilisation

10. How to determine the device Version Number in User mode

To display the device Version Number of the datAshur Personal
Instructions
1. Unlock the datAshur Personal
2. Enable Options by pressing the KEY button 3 times -
treble click
3. Within 10 seconds begin to Press button number 8
(tuV) followed by the number 6 (mNo) button - (86)
4. Press KEY button once
For example, if the revision number is '1.11', the
times. Once the sequence has ended the Red,

11. How to create an Admin PIN

An Admin PIN is a useful feature for corporate deployment, for example:
• Recovering data from a drive and configuring a new User PIN in the event an employee has forgotten their PIN
• Retrieving data from a drive if an employee leaves the company
• Setting policies such as 'Read-Only'
• The Admin PIN can be used to override all User settings
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
with User PIN
2
Red LED will blink once (1) and the
Green & Blue
www.istorage-uk.com
do the following.
2
LED LED State
Red solid LED changing to
indicating successful User PIN entry
Green and Blue
&
awaiting new instructions in OPTIONS mode.
&
Green and Blue
Red, Green &
together once followed by the
to the most significant digit of revision and
the Green LED will blink according to the least
significant digit of the revision number
Green
LED's will blink together once and then to solid Green.
Green solid LED
LED's blinking together
LED's continue to blink together
Blue LED's will quickly blink
Red LED blinking
LED will blink eleven (11)
#11