GP Well Biancolatte GP5000 Mode D'emploi page 16

- - Operation - -
EN
- Preparing chocolate -
1. Position the agitator (6) in the container (3) (fig. B2).
2. Pour the cold milk in the container (3), checking that the quantity is between
min. (80 ml) and MAX (200 ml) (fig. C).
Do not insert solid chocolate pieces or tablets.
The doses recommended for the preparation of a chocolate:
100 ml milk, 25 g chocolate powder.
3. Place the container (3) on the heating base (2) (fig. D).
4. Connect the plug of the power cable to the socket (fig. E).
Check that the grid voltage matches the data on the data
plate (1a) of the device (located above the device body "1").
5. Start the agitator (6) by pressing button
Add the chocolate powder little by little.
The mixture of chocolate and milk is agitated and heated.
When the container (3) is lifted from the heating base (2)
all buttons flash.
- Do not touch the heating base (2) (fig. F).
Danger of burning
- Do not touch metal parts of the container (3) (fig. G-H).
Danger of burning
6. When temperature is reached, the agitator automatically stops (max. 5 minutes).
7. To stop operation, press button
base. For proper preparation of the recipe, wait for the function to stop automatically.
8. After use, unplug the plug from the power socket.
- 24 -
(10); the button lights up (fig. E).
!
!
(10) again or lift the container from the heating
- - Maintenance - -
- Daily cleaning -
Before cleaning, ALWAYS unplug the
plug from the power socket.
1. To clean the device body (1), use a damp cloth avoiding
use of abrasive detergents.
2. The device must be cleaned after each use. Wash the cover
(4) and container (3) with cold water.
3. Fill container (3) with hot water and leave it for a few
minutes, then clean by wiping with a cloth.
4. If milk is heated or frothy milk is prepared continuously,
clean the container (3) after each use as described above.
Do not wash the machine body in a dishwasher.
Do not use aggressive or abrasive detergents, nor sharp
objects (such as knives or hard brushes) to clean the
container (3).
5. Before plugging the power plug into the socket again, ensure that the device and all
its components are thoroughly dry.
Never immerse the device body (1) in water or other liquids,
nor wash it in a dishwasher.
Do not dry any part of the device in conventional and/or
micro-wave ovens.
- 25 -
EN
NO!!