GP Well Biancolatte GP5000 Mode D'emploi page 15

- - Operation - -
EN
- Preparing the device -
After removing the device from the packaging:
1. Wash with hot water the container (3), cover (4) and the agitator to be used, then dry
them.
- Preparing frothy cold milk -
1. Position the agitator (5) in the container (3) (fig. B1).
2. Pour cold milk into the container (3), checking that the quantity is between min (80 ml)
and MAX (200 ml) (fig. C).
3. Place the container (3) on the heating base (2) (fig. D).
4. Connect the plug of the power cable to the socket (fig. E).
Check that the grid voltage matches the data on the data
plate (1a) of the device (located above the device body "1").
5. Start the agitator (5) by pressing button
is agitated but not heated.
When the container (3) is lifted from the heating base (2)
all buttons flash.
6. After approx. 2 minutes of continuous operation the agitator automatically stops.
7. To stop operation, press button
base. For proper preparation of the recipe, wait for the function to stop automatically.
8. After use, unplug the plug from the power socket.
- 22 -
(8); the button lights up (fig. E). Milk
(8) again or lift the container from the heating
- - Operation - -
- Preparing frothy hot milk -
1. Position the agitator (5) in the container (3) (fig. B1).
2. Pour cold milk into the container (3), checking that the quantity is between min (80 ml)
and MAX (200 ml) (fig. C).
3. Place the container (3) on the heating base (2) (fig. D).
4. Connect the plug of the power cable to the socket (fig. E).
Check that the grid voltage matches the data on the data
plate (1a) of the device (located above the device body "1").
5. Start the agitator (5) by pressing button
Milk is agitated and heated.
When the container (3) is lifted from the heating base (2)
all buttons flash.
- Do not touch the heating base (2) (fig. F).
Danger of burning !
- Do not touch metal parts of the container (3) (fig. G-H).
Danger of burning !
6. When temperature is reached, the agitator automatically stops (max. 5 minutes).
7. To stop operation, press button
base.
For proper preparation of the recipe, wait for the function to stop automatically.
8. After use, unplug the plug from the power socket.
- 23 -
EN
(9); the button lights up (fig. E).
(9) again or lift the container from the heating