Radio Tamper; Allocation Of Siren To An Alarm Group; Fire Alarm Indication - DAITEM SH402AX Notice D'installation

GB

4.13 Radio tamper

If the radio links are deliberately tampered with, the siren is triggered.
To activate or deactivate the radio tamper system, enter:
siren n°
Factory setting: 1
4.14 Allocation of siren to alarm group
To allocate the siren to one or several alarm system groups, enter:
siren n°
Factory setting: all groups
example, to allocate siren n° 1 to Group 2 and Group 3, enter:
4.15 fire alarm indication
To modify fire alarm indication, enter:
siren n°
Factory setting: 1
0: disabled
1: enabled
...
groups from 1 to 8 depending
on the type of control panel
0: sounding
1: sounding and vocal message ("Fire_alarm")
100