Makita BHX2500CA Instructions D'emploi page 56

EMISSION COMPLIANCE PERIOD
For handheld engine : The Emissions
Compliance Period referred to on the Emissions
Compliance label indicates the number of operating hours for which the engine has
been shown to meet Federal emission requirements.
Category C=50 hours, B=125 hours, and A=300 hours.
An Air Index Information hang tag was supplied to this engine in accordance with
the emission regulations of the California Air Resources Board.
The bar graph on the hang tag shows the emissions performance of this engine.
The bar graph can be used to compare the emissions performance with other avail-
able engine. The lower the Air Index, the less pollution.
The following durability description is to provide you with information relating to the
emission durability period of the engine.
Descriptive Term
Moderate –
Intermediate –
Extended –
Notice : The Air Index Information hang tag must remain on the engine or on the
equipment until it is sold to the ultimate purchaser. Remove the hang tag
before operating the engine.
AIR INDEX
Applicable to Emissions Durability Period
50hours (0-65 cc)
125hours (0-65 cc)
300hours (0-65 cc)
56