Kenwood TTM610 Mode D'emploi page 6

2 Place the food item in the
sandwich cage and close.
3 Adjust the slot width to suit the
sandwich cage
Take care not to touch the
fascia panel, it may be hot.
4 Lower the carriage lever
place the sandwich cage into the
slot .
5 Move the browning control to the
desired setting.
6 Select the desired button. The
selected button and cancel button
lights will illuminate, an audible
beep will be heard and toasting will
begin.
G
In order to monitor the progress of
the toasting, the sandwich cage
can be lifted up without cancelling.
7 To stop toasting at any stage,
press the cancel button. The
toaster will emit an audible beep to
indicate toasting is cancelled and
the button lights will go out.
8 When toasting has finished the
toaster will emit an audible beep
and the button lights will go out
and the toasting will stop. The food
item will NOT pop up.
9 Leave the toasted food item to
stand for 1 minute inside the
toaster before serving.
10 Remove the sandwich cage, then
open it up and tip the food item
onto a plate.
11 After using, unplug the toaster.
CAUTION:
G
The sandwich cage will be
very hot, ensure it is placed
on a heat resistant surface
and take care when
handling.
G
Ensure ingredients are
piping hot throughout before
serving.
G
Take care when biting into
the food items as the fillings
can be very hot.
. CAUTION:
and
6