Texas HS600TG Manuel D'utilisation page 11

Box Contents
Figure 1:
A. Machine with upper handle bar mounted
B. Swing handle
C. Mounting hardware for handle bar
D. Engine Manual and User's Manual
Identification of parts
Figure 2
A. Brush.
B. Support wheel for brush / adjustment of height.
C. Wheels.
D. Lower handle bar.
E. Mounting hardware for upper part of handle bar. Adjustment of handle bar.
F. Upper handle bar.
G. Clutch lever - Activating brush.
H. Clutch lever - Reverse and activation of brush.
I. Clutch lever - Forward.
J. Clutch lever - Forward.
K. Clutch lever - Reverse.
L. Throttle Lever.
M. Swing handle
N. Engine (may vary from picture)
O. Belt guard
P. Electric starter - 230V
Assembly
The sweeper is almost ready assembled from the factory. Only a few items remain to be
assembled:
1. Mount upper part of handle bar to lower part with the enclosed bolt kit.
See Figure 3
Explanation, Figure 3:
a. Lower part of handle bar
b. Upper handle bar
2. Mount swing handle with enclosed bolt and nut.
Figure 2, C.
3.
Check the tire pressure on both wheels before use. Correct tire pressure is
30 psi/2 bar. Figure 4.
Use of machine with too low tire pressure, can damage the tires
11
!