Velleman BTSP5 Mode D'emploi page 6

4. Your smartphone (or other device) will ask you to confirm the pairing
to the speaker. Agree.
5. Type password 0000 (4 times zero) if necessary and confirm.
6.
The device will display when the pairing process is completed.
Note: In case of unsuccessful pairing, switch all devices off and start the
connection process.
When switching on your speaker, your smartphone (or other device)
will automatically pair with it if the Bluetooth function remains
activated.
8.3 Connecting Your Smartphone via NFC
Near field communication (NFC) is a set of standards for smartphones
and similar devices to establish radio communication with each other by
touching them together or bringing them into proximity, usually no more
than a few centimeters.
1. Activate the NFC function (subject to brand and model) of your
smartphone (or other device). Refer to your device's user manual.
2. Bring the smartphone (or other device) close to the speaker.
3.
Your smartphone (or other device) will ask you to confirm the pairing
to the speaker. Agree.
4.
The device will display when the pairing process is completed.
9. LED Status
LED colour
green
red
10. Cleaning and Maintenance
This device does not need any particular maintenance.
•
Occasionally clean the device with a damp cloth to keep it looking new.
•
Do not use harsh chemicals, cleaning solvents or strong detergents.
V. 02 – 26/08/2014
BTSP5
status
flashing quickly
flashing slowly
steady
steady
off
description
ready to be paired
pairing completed
fully charged
6
low battery
charging
©Velleman nv