Autoposition; H (Horizontal) Position; Vertical) Position; Phase - Saba S 32 TNV 08 Mode D'emploi

Autoposition

If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using
buttons. Press OK button.
Warning: Please ensure auto adjustment is
performed with a full screen image
to ensure best results.

H (Horizontal) Position

This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using
Use / button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
Select V Position item by using
Use / button to adjust the value.

Phase

Depending on the resolution and scan
frequency that you input to the TV set, you may
see a hazy or noisy picture on the screen. In
such a case you can use this item to get a
clear picture by trial and error method.
Select Phase item by using
Use  /  button to adjust the value.

Dot Clock

Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like
paragraphs or text in smaller fonts.
Select Dot Clock item by using
buttons. Use / button to adjust the value.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65
Programme Number, Programme Name,
Sound Indicator and Zoom Mode information
is displayed on the screen when a new
programme is entered or
pressed.
or
Press
indicator will be displayed in the upper side
of the screen.
To cancel mute, there are two alternatives; the
first one is pressing the
second one is increasing the volume level.
or button.
Press the
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
or button.
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. You can use
the PIP position. Aspect Ratio of the PIP
window is fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by a red frame around it.
or buttons.
The active window can be changed by
pressing
belongs to active window. The place of the
status OSDs are same for both windows.
Press the
spreadsheets or
Press the
At PAP Mode, two pictures with equal sizes
or
are displayed on the screen. Aspect Ratios of
the windows are fixed.
English - 94 -
94

Displaying TV Information

Mute Function

button to disable sound. Mute
Mute
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
button to switch to PIP mode.
 /  button. The status info OSD
button again to exit the PIP mode.
button to switch to PAP mode.
23.07.2008, 10:38
button is
button and the
button to change