Settings [Menu 9]
The following options are available:
• On
You must enter the PIN each time the phone is switched on.
• Off
The phone connects directly to the network when you switch it on.
Phone lock [Menu 9-6-2]
When the Phone lock feature is enabled, the phone is locked and
you must enter the phone password each time the phone is
switched on. The password is factory set to 0000. To change the
phone password, refer to the Change codes – Security code
menu option [Menu 9-6-4-1]. Once the correct password has been
entered, you can use the phone until you switch it off.
The following options are available:
• Power On
- Enable
You are required to enter the phone password when you switch
the phone on.
- Disable
You do not need to enter the phone password when you switch
the phone on.
- If SIM changed
Your phone will request security code only when you change
your SIM card.
• Immediately
After entering the correct security code, the phone will lock after
going into the idle state. If you want to disable this phone lock, you
should enter the right security code after pressing the right soft
key. If you power off in the phone lock state, when the phone is
next powered on, the phone is in the lock state.
82