Electrolux EFP60560OX Manuel D'utilisation page 6

6 www.electrolux.com
5. CONTROLS
Use the high suction speed in cases
of concentrated kitchen vapours. It is
recommended that the cooker hood suction
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking
and for another 15 minutes approximately
after terminating cooking.
click!
T1
T5
T4
T3
T2
T1
The controls are located on the upper side
of the pull-out drawer of the hood.
Open the drawer to access the controls and
put the hood on.
When the drawer closed, all hood functions
are disabled except for the light, whose
button is placed also on the underside of
the drawer.
By reopening the drawer, the previous
operation mode is restored and you can
see the related indicator lights.
T1. Button ON/OFF lights (Led L1 lit)
T2. Button OFF – Selection button suction
speed (power) 1 (Led L2 lit)
T3. Selection button suction speed (power)
2 (Led L2+L3 lit)
T4. Selection button suction speed (power)
3 (Led L2+L3+L4 liti)
T5. Selection button intensive suction
speed (power) (Led L2+L3+L4 lit + Led
L5 flashing) - duration 5 minutes – after
which the hood automatically sets
suction speed (power) 2.
Delayed switch-off of the hood (flashing
LEDs):
It is possible to set the delayed hood
switch-off by pressing again for more than
2 seconds the button of the suction speed
(power) active at that time.
The available delayed switch-off options
are:
Suction speed (power) 1: 20 minutes
Suction speed (power) 2: 15 minutes
Suction speed (power) 3: 10 minutes
Intensive suction speed (power): 5 minutes
Filter saturation indicator
The hood is equipped with a function that
warns the user, at regular time intervals,
when the filters are saturated and it is
necessary to perform their maintenance.
Grease filter saturation indicator: With
the hood off (OFF) all suction speed
(power) LEDs light up with steady light for
40 seconds.
Activated charcoal filter saturation
indicator: With the hood off (OFF) all
suction speed (power) LEDsflash for 40
seconds.
Activation of the active charcoal filter