Overview - Siemens MQ5B Série Notice D'utilisation

MQ5B.book Seite 7 Mittwoch, 12. November 2014 12:26 12
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
, Safety instructions for this appliance
Risk of injury
Risk of electric shock
Do not use the hand blender with damp hands and do not operate
it at no load.
Do not immerse the appliance in liquid above the blender foot-base
unit connection point. Never immerse the base unit in liquids and
do not clean in the dishwasher.
Risk of injury from sharp blades/rotating drive!
Never grip the blade in the blender foot.
Never clean the blades with bare hands. Use a brush.
Risk of scalding!
Caution when processing hot liquids.
Liquids may splash during processing.
Important!
Operate the hand blender with original accessories only.
Do not attach or remove tools until the appliance is at a standstill.
Recommendation: Never switch on the appliance for longer
as you need to processing the ingredients.
The blender jug is not suitable for use in the microwave.
Never place blender foot on hot surfaces or use in very hot food.
Leave hot food to cool down to at least 80 °C before processing
with the blender! Before using the hand blender in a cooking pot,
take the pot off the hotplate.

Overview

Please fold out the illustrated pages.
Fig. A
1 Base unit
2 ON button
The hand blender remains switched
on as long as the ON button is pressed.
3 Blender foot
Attach the blender foot and lock into
position.
some models:
4 Universal cutter
(separate operating instructions)
If the universal cutter is not included with
the hand blender, it can be ordered from
customer service (order no. 640698
or 640686).
With the universal cutter use the appliance
at full power (according to the recipe).
You can find the recipe in the operating
instructions of the universal cutter.
en
7